Send the task, not a product name
Describe the hazard and the handling: what is being lifted, how wet or oily it is, whether there is heat, cut risk or vibration. If you already buy a glove, send a sample or the spec and we work from that.
Work glove factory · Direct supply
Work gloves built to a spec sheet, not a catalogue page.
Cut, puncture, impact, coated, leather and winter work gloves for brands, distributors and safety wholesalers. We match the glove to the task, sample it, and make bulk against the sample you approved.
The range
Start where the hazard is
Seventeen families cover most industrial handling; these twelve are the ones buyers ask for first. Each page states the liner, coating, protection level and the task the glove was built for.
Cut Resistant ANSI A2–A6 
Puncture Resistant Level 3–5 
Impact Resistant TPR back-of-hand 
PU Coated 13G & 15G liners 
Nitrile Coated Sandy & foam 
Leather Cowhide & goatskin 
Winter Insulated 
Welding Leather gauntlet 
Hi-Visibility Site-safe colors 
Anti-Vibration Gel palm 
ESD & Anti-Static Electronics 
Disposable Nitrile Industrial grade How an order runs
Four steps, no surprises
The expensive mistakes on glove orders happen before production starts: the wrong coating, the wrong size ratio, or a sample that was never written down.
Counter-sample with the spec written down
We match liner, gauge, coating, finish and size grading, then send a sample with a spec sheet and a packaging mock-up. Nothing goes to bulk until that sample is approved in writing.
Bulk against the approved sample
Production runs against the same sheet, so the second order matches the first. Size ratios are packed per carton rather than flat, so each site receives the mix it actually uses.
Photographs before the cartons close
Every order is photographed packed and labelled before dispatch. If something is not what you approved, it is cheaper to find that in our warehouse than in yours.
By industry
Built around the shift
A construction crew, a pick-and-pack floor and a service van each destroy gloves in a different place. These pages start from the work.
Reference
Charts and levels
Cut levels, sizes and the family taxonomy, written to be used on a desk rather than skimmed. Levels are always confirmed on the sample you approve.
ANSI Cut Levels Explained: A1 to A9 Guide · ANSI/ISEA 105 cut levels Work Glove Size Chart Guide · sizing & fit Types of Work Gloves, Explained Guide · glove taxonomy Custom Work Gloves, Made to Your Spec Private label · 500 pairs per style Work Glove Manufacturer Knitting · dipping · cutting & sewing Wholesale Work Gloves Distributor & importer program
Key facts
What you can quote against
Quotations are built from the same terms every time, so the numbers you plan around do not move between the sample and the bulk run.
Supply terms
- Origin
- China
- Minimum order
- 500 pairs per style and color
- Samples
- 7–10 days
- Bulk lead time
- 20–30 days after sample approval
- Terms
- FOB, CIF, DDP
- Private label
- Logo, label, packaging, carton marks
- Before dispatch
- Photos of packed cartons
- Material certificate
- MTR on request
Straight answers
Questions buyers ask first
Minimums, samples, private label and what arrives with an order. If your question is about a specific style, send the spec and we answer with the sample plan.
What is the minimum order for work gloves?
500 pairs per style and colour. Sizes are packed in the ratio you use rather than flat, so each carton arrives with a workable mix. Different styles can ship together, but each style and colour carries its own 500-pair minimum.
How long do samples and bulk orders take?
A counter-sample takes 7–10 days from the confirmed spec. Bulk production runs 20–30 days after you approve that sample in writing.
Can you make gloves under our own brand?
Yes. Logo print, woven or printed labels, hang tags, poly bags and carton marks are part of the private label programme, from 500 pairs per style.
Do you supply medical or examination gloves?
No. Our disposable nitrile is industrial grade or food contact grade. Medical and examination gloves are outside the range we supply.
What does a quotation include?
Unit price at your quantity, the sample plan, packaging options and the Incoterms you asked for (FOB, CIF or DDP). Branding and carton work are shown separately so you can see where the cost sits.
How do we choose the right cut level?
Start from the task: what is being handled, how sharp it is, whether the hand is wet or oily, and how much grip the job needs. A2 to A6 covers most handling work; the final level is confirmed on the sample you approve.
What comes with an order?
A written spec sheet tied to the approved sample, a material certificate (MTR) on request, and photographs of the packed and labelled cartons before dispatch.
Next step
Send your spec. Get samples and a landed price.
Share the glove type, liner and coating, quantities and destination. We reply with the sample plan, unit price at your quantity and the packaging options for your market.
Stock reference images · production photography to follow